Dx51D Galvanized Steel Coil 0.10*1000 Mm 16~30% Elongation Thin Plate

0.10 * 1000 mm Cold Rolled Coil dx51d / Galvanzied Steel Coil

• Galvanized Steel Sheet & Coil Material Types
• Commercial Steel (CS Types A, B, and C)
• Forming Steel (FS Types A and B)
• Deep Drawing Steel (DDS Types A and C)
• Extra Deep Drawing Steel (EDDS)
• Structural Steel (SS) – further designated by Grades (33,37,40,50,80)
• High Strength Low Alloy Steel (HSLAS)

Galvanized Steel Coil gets coated in layers of zinc because rust won't attack this protective metal. The most external layer is all zinc, but successive layers are a mixture of zinc and iron, with an interior of pure steel. These multiple layers are responsible for the amazing property of the metal to withstand corrosion-inducing circumstances. Zinc also protects the steel by acting as a "sacrificial layer." If rust does take hold on the surface of Galvanized steel Coil, the zinc will get corroded first. This allows the zinc that is spread over the breach or scratch to prevent rust from reaching the steel. For countless outdoor, marine, or industrial applications, Galvanized steel Coil is an essential fabrication component.Galvanized coil, the thin steel plate immersed in the molten zinc bath, so that its surface adheres to a layer of zinc thin steel plate. At present, continuous galvanizing process is mainly used to produce galvanized steel sheet, which is made by continuously immersing coiled steel sheet in galvanized bath and alloying galvanized steel sheet. This kind of steel plate is also made by hot dipping method, but it is heated to about 500 C immediately after the trough is out to form zinc and iron alloy film. The galvanized coil has good adhesion and weldability of the coating.

Hot Dip Galvanized coil produced by JIN LAI,is coated with zinc using a continuous and controlled process. The tight metallurgical bond between the steel and coating takes place in a continuous galvanizing line. This process results in a material with the strength and formability of steel and with the corrosion protection provided by zinc. The zinc coating protects the base metal from external corrosive elements in two main ways, by acting as (1) a physical barrier and (2) a sacrificial anode.

Tolerance on Nominal Thickness for galvanized steel

Note: Restricted gauge ranges and customized thickness tolerances can be offered on request.

Specifications of Glvanized Steel Coils / Sheet

hot dip galvanized coils

hot rolled steel coil

Size	Zinc coat	Material
0.25*1000*C	80	DX51D+Z
0.25*1000*C	80	DX51D+Z
0.3*1000*C	80	DX51D+Z
0.35*1000*C	80	DX51D+Z
0.4*1000*C	80	DX51D+Z
0.5*1000*C	80	S280GD+Z
0.5*1000*C	80	DX51D+Z
0.58*1000*C	80	S350GD+Z
0.6*1000*C	80	DX51D+Z
0.7*1000*C	80	DX51D+Z
0.75*1000*C	80	DX51D+Z
0.8*1000*C	80	DX51D+Z
0.8*1000*C	80	DX53D+Z
0.85*1000*C	80	DX51D+Z
0.9*1000*C	80	DX51D+Z
0.98*1000*C	80	DX51D+Z
0.95*1000*C	80	DX51D+Z
1.0*1000*C	80	DX51D+Z
1.1*1000*C	80	DX51D+Z
1.2*1000*C	80	DX51D+Z
1.2*1050*C	150	CSB
1.4*1000*C	80	DX51D+Z
Size	Zinc coat	Material
1.5*1000*C	80	DX51D+Z
1.55*1000*C	180	S280GD+Z
1.55*1000*C	180	S350GD+Z
1.6*1000*C	80	DX51D+Z
1.8*1000*C	80	DX51D+Z
1.9*1000*C	80	DX51D+Z
1.95*1000*C	180	S350GD
1.98*1000*C	80	DX51D+Z
1.95*1000*C	180	S320GD+Z
1.95*1000*C	180	S280GD+Z
1.95*1000*C	275	S350GD+Z
2.0*1000*C	80	DX51D+Z
Size	Zinc coat	Material
0.36*1250*C	80
0.4*1250*C	80	DX51D+Z
0.42*1250*C	80	DX51D+Z
0.45*1250*C	225	S280GD+Z
0.47*1250*C	225	S280GD+Z
0.5*1250*C	80	SGCC
0.55*1250*C	180	S280GD+Z
0.55*1250*C	225	S280GD+Z
0.6*1250*C	80	DX51D+Z
0.65*1250*C	180	DX51D+Z
0.7*1250*C	80	DX51D+Z
0.7*1250*C	80	SGCC
0.75*1250*C	80	DX51D+Z
0.8*1250*C	80	DX51D+Z
0.9*1250*C	80	DX51D+Z
0.95*1250*C	80	DX51D+Z
Size	Zinc coat	Material
1.0*1250*C	80	DX51D+Z
1.15*1250*C	80	DX51D+Z
1.1*1250*C	80	DX51D+Z
1.2*1250*C	80	DX51D+Z
1.35*1250*C	80	DX51D+Z
1.4*1250*C	80	DX51D+Z
1.5*1250*C	80	DX51D+Z
1.55*1250*C	80	DX51D+Z
1.6*1250*C	120	SGCC
1.6*1250*C	80	DX51D+Z
Dx51D Galvanized Steel Coil 0.10*1000 Mm 16~30% Elongation Thin Plate Images